SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklift
Used Forklift Parts - Unavoidably, lift truck parts would eventually wear out and need replacing. The option of acquiring brand new parts can become costly so another idea is to obtain used components. This can save a lot of money in the long run. It is a good idea to acquire used forklift components that have been remanufactured. These parts would ensure that you are getting parts which will work for a long time and be productive.
Broken or worn parts that are reproduced are a less expensive answer than rebuilding. With rebuilding parts, just the parts which are worn out or broken get replaced, which means that other wearable components might break down soon after acquisition.
Remanufacturing on the other hand offers the best assurance for used components. Remanufactured parts are taken apart and cleaned and then all wearable pieces are replaced. All wearable components are replaced regardless of age or wear which is another rationale why remanufactured parts in general run so much better. Whatever component within the part is brand new and this offers far longer life to the used part. Depending on the forklift components which are being redone, the cleaning process and the entire remanufacturing process will differ.
After complete disassembly, the engines are oven cleaned. Different parts of the engine like for instance rings, pistons, spark plugs, filters, valves, and valve springs could be replaced during the remanufacture process. The engines are hot tested after reassembly to guarantee that there are no oil pressure problems, no leaks, noises or any vacuum.
Transmissions are pressure washed, disassembled and oven cleaned. A complete examination is performed to be able to check for any cracks. Bushings, seals and bearings are all replaced. Normally, the replacement parts utilized on transmission parts meet OEM specifications.
Some components such as the alternator, the water pump, torque converters, the starter and steer axles could obtain longer serviceability after being reproduced and having all wearable parts replaced. The electronic control in the electric forklift is maintained by the control card. This particular card could likewise be reproduced with replacing all aged and worn out components. Unlike different forklift components the control card can only have the worn and aged components replaced.
Components which are reproduced have to be comprehensively examined upon reassembly to guarantee they are in good condition before being sold. When obtaining these components, it is a good idea to make certain that they have undergone all of the proper testing and inspections. On certain bigger components like for example transmissions, steer axles and engines, OEM specification replacement components must be used.
The forklift dealer could guarantee that the components they have reproduced meet the OEM specifications. This would likewise ensure the components meet industry standards. A lot of details go into remanufacturing used components. This attention to detail offers more serviceability out of reproduced parts compared to the components that were merely rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Penticton, British Columbia
forkliftpartspenticton.ca
Email Us
About Us